Project description:
McCammon Engineering Corp., our family-owned and operated firm has become a leading provider of precision dip molding for rubber bellows to a wide variety of industries.
Because we have a stake in every part that leaves our premises, our customers rely on us to perform the precision dip molding of rubber bellows with unusual requirements and special features. For example, a customer asked us to manufacture a small bellow, complete with four convolutes. Not only is this bellow unusually small at 1.5″ long and .70″ wide, it also required both a rolled bead and a trimmed end.
We have close to 30 years of industry experience, and performed the precision dip molding as well as the bead rolling and pre-dry water bath/leach. We then followed up with curing, trimming and post-cure silicone tumbling as secondary processes. We also ensured the part, which is just .015″ thick, met tolerances of ± 0.005″. For more information on this precision dip molded rubber bellow, see the table below and contact us directly.
Highlights of a Precision Dip Molding Project
- Product Description
-
This Small Bellow with 4 Convolutes is Used as a Dust Cover.
- Dip Molding Capabilities Applied / Processes
-
Primary:
Dip Molding
Bead Rolling
Pre-Dry Water Bath/LeachSecondary:
Curing
Trimming
Post-Cure Silicone Tumbling
- Equipment Used to Manufacture Part
-
Dip Machines, Industrial Ovens, Dip Tanks, Coagulant Tanks, Leach (water bath) Tanks, Trimming/Shears, Finishing Tumbler
- Overall Part Dimensions
-
1.50″ Length x 0.70″ Width
- Tightest Tolerances
-
± 0.005″
- Material Used
-
Neoprene Rubber
Thickness: 0.015″
- Material Finish
-
Black: Semi-Gloss
- Additional Facts
-
This Part Has a Rolled Bead on One End. The Other End has Been Trimmed.
- In process testing / inspection performed
-
Dimensional Inspection
Visual Inspection
- Volume
-
500 per Year
- Delivery / Turnaround Time
-
1-2 Weeks
- Delivery Location
-
Warwick, New York
- Standards Met
-
Customer Specifications, 2D CAD Drawing
First Article Inspection Report
- Product Name
-
Dust Guard
- Why did you choose to showcase this Job?
-
We Produce Many Variations of Small Bellows Similar to This One in Both Neoprene and Natural Latex. I Chose to Highlight this Product Because of the Rolled Bead, Trimmed End and the Small Size.
